Samsung Galaxy Note 2 GT-N7100- How to Install N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware

Samsung Galaxy Note 2 GT-N7100- How to Install N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware,N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Samsung Galaxy Note 2 GT-N7100 users can update their device with the UBDMH1 Android 4.1.2 Jelly Bean official firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is N7100UBDMH1. The Galaxy Note 2 N7100 receiving Android 4.1.2 Jelly Bean from February 2013 and here we have the latest 4.1.2 firmware for the device. If you yet to update your device to this latest firmware then update the same using our simple tutorial below. The below guide will help you to download and install the N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

Root N7100UBDMH1


Samsung Galaxy Note 2 GT-N7100- How to Install N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware .

If your Galaxy Note 2 N7100 already running on Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest update.

So, want to update your Galaxy Note 2 N7100 to the latest UBDMH1 Android 4.1.2 Jelly Bean firmware? For official way, either you can go for OTA update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 UBDMH1 firmware on your Galaxy Note 2 N7100 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Note 2 GT-N7100 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.1.2 Jelly Bean N7100UBDMH1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 2 GT-N7100 model.
Argentina (Movistar): N7100UBDMH1_N7100TFGDMH1_UFN.zip
Argentina: N7100UBDMH1_N7100UWMDMH1_TGP.zip
Uruguay: N7100UBDMH1_N7100UUBDMH2_UPO.zip
Argentina (Personal): N7100UBDMH1_N7100PSNDMH2_PSN.zip
Dominican Republic (Orange): N7100UBDMH1_N7100DORDMH1_DOR.zip
Android official firmware here see all update model
[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 N7100UBDMH1 official firmware on Galaxy Note 2 N7100.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Note 2 N7100 through Odin:

Samsung Galaxy Note 2 GT-N7100- How to Install N7100UBDMH1 Android 4.1.2 Jelly Bean Firmware
  1. Download Android 4.1.2 UBDMH1 Firmware for Galaxy Note 2 N7100 from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Note 2 N7100 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 2 N7100 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7100XXDLJ5_N7100ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats! you have just finished the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy Note 2 GT-N7100. Hope you successfully completed the update process. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.1.2 Jelly Bean build version UBDMH1. You can verify the firmware update details from Settings-About Phone. So, enjoy all the new features and improvements on your device and don’t forget to share your experience in the comment below.

No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...

Mahbub Alfa Solution Headline Animator

Please Log in