Nokia C3-00 auto off during voice call problem solution

If nokia c3-00 automatically get off during voice call it can be fault of shortage or rust. It can be cause of water damage. Look at the diagram bellow to solve auto off problem in Nokia c3-00.
Nokia C3-00 auto off during voice call problem solution
Keep in mind after dis assembly of Nokia c3-00 look at the whole mother board for carbon water damages and rust. Make it clean with electronics cleaner and apply heat so that it can be dry smoothly. Do not apply much heat because much heat can harm your skin and may can damage the mother board.
Check mobile phone with replacement of ear peace speaker to solve auto off problem in nokia c3-00.
Remove vibrator to solve auto off problem in nokia c3.

Nokia C5-05 Charging Problem solution with jumpers 100% tested solution

Solve nokia c5-05 not charging problem in a few steps that are given in this post. A repairing diagram is also attached in this post to solve nokia c5-05 not charging solution with jumpers.
Nokia C5-05 Charging Problem solution with jumpers
Keep in mind after dis assembly of Nokia c5-05 look at the whole mother board for carbon water damages and rust. Make it clean with electronics cleaner and apply heat so that it can be dry smoothly. Do not apply much heat because much heat can harm your skin and may can damage the mother board.
Find out these parts that are given in above diagram to solve charging problem in nokia c505. Check all these parts with meter and if any of these links is broken apply jumpers. All these parts are used in charging function of nokia c505. So check these solve not charging problem in nokia c505.

Nokia 6120 LCD Light Problem ways Led Jumper Solution

If you have LCD LED light problem in Nokia 6120. It can be solve with a few simple steps you can read in this post.The diagram will help you to solve Keypad and Lcd Display led lights.
Nokia 6120 LCD Light Problem ways Led Jumper Solution
After disassemble you can find these parts in it. Lcd jack and mother boards light prints.Clean these parts with electronics cleaner and apply heat so that it can be dry. Using hot air you can make it dry but do not apply much heat because it can harm you and can damage the mother board.
In the diagram above you can see two different color lines one is blue and other is red. These lines are defining lcd ways.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 1680 Keypad Led Light Problem Jumpers Solution

In nokia 1680 there are eight led lights in keyboard and these can be off due to water damage or rust or carbon. so if you are facing no keypad light and key pad led problem then look at the diagram given bellow it will help you to solve these problems.
Nokia 1680 Keypad Led Light Problem Jumpers Solution
Check the light track which Is identified in diagram with different colors and each link shows flow of circuit in nokia 1680 from parts up to the led lights. Check all these tracks with meter and if any of them is braking apply jumpers as given in nokia 1680 light repairing diagram above.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

nokia 5800 Ringer not working problem solution tested

Nokia 5800 ringer problem can be solve with a few steps that are given in diagram bellow so look at diagram bellow to solve love ringer voice, no ringer tones, no ringer working problems in Nokia 5800.in diagram there are two colors blue and red both colors are defining path of circuit in mobile phone.

Check ringer and if ringer do not show continuity or a good value with meter then change ringer with new one. Check points on board where ringer have to attaché after put in casing housing.
Then check all these paths as shown in diagram above and if any of them is broken or missing components then apply jumpers as described above. Small circle shows positions where we are able to make jumpers. in these place we can apply jumpers to solve ringer problem in Nokia 5800.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 103 Power Problem Dead Shortage Solution

If nokia 103 is dead due to water damages and it can not be power on. We have to solve its shortage with checking its parts and components that are using vbb tracks.
Nokia 103 Power Problem Dead Shortage Solution
Once you have dis assemble the mobile phone look at the whole board vary carefully. If here is some rust carbon or water damages apply electronics cleaner and make it clean.Apply hot air to make it dry.
Keep in mind do not apply much heat because it can damage the mother board and can be harm for your skin.
Check the battery points with meter as shown in diagram above. Remove this capestor that is given in bellow diagram to repair nokia 103 power problem On off problem due to shortage.
Nokia 103 Power Problem Dead Shortage Solutionn

Nokia 110 Light Problem Solution Jumper Ways

In Nokia 110 Led Light Problem can be due to water damages. Broken parts and missing components can create a problem of led lights, Lcd display light problem. To solve Nokia 110 light problem you can follow a few basic steps that i am going to post here today.
Nokia 110 Light Problem Solution Jumper Ways
Keep in mind after dis assembly of Nokia 110 look at the whole mother board for carbon water damages and rust. Make it clean with electronics cleaner and apply heat so that it can be dry smoothly. Do not apply much heat because much heat can harm your skin and may can damage the mother board.
Remove three legs Divert and apply jumpers as shown in the above diagram. Check Lcd prints because they can also be cause of Nokia 110 light problem.

Nokia 110 Keypad 1,4,7,* is not working solution

If Nokia 110 keypad is not working you can solve keypad problem in nokia 110 by following these steps that are given in in this post. Look at the diagram bellow and follow these steps.
Nokia 110 Keypad 1,4,7, is not working solution
Keep in mind after dis assembly of Nokia 110 look at the whole mother board for carbon water damages and rust. Make it clean with electronics cleaner and apply heat so that it can be dry smoothly. Do not apply much heat because much heat can harm your skin and may can damage the mother board.
In above diagram you can see a resistance is identified. Remove it and it will solve keypad problem if keys are working duplicate. Nokia 110 keypad problem solution.

Nokia 110 light problem solution with jumpers

problem is not lcd display light and keypad light also not getting on lighten.it is common fault of lcd pin 2 and 3.in diagram given bellow you can find these two lines with color so make jumper as shown in diagram.
Nokia 110 light problem solution with jumpers
on lcd prints strip can be scratched vary carefully and slightly so that it can be sold easily and then you can make jumper as i told above.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 6260 light problem solution with jumpers 100% tested way

Nokia 6260 light problem can be cause of water damage in it. Carbon or burn parts can also be the reason of light problem in nokia 6260.Due to light problem we can not see the display of nokia 6260.
Nokia 6260 light problem solution with jumpers
To solve nokia 6260 light problem we can make these jumpers as given in above diagram to solve reparing lcd display light in nokia 6260. Keypad light problem, lcd light problem, display light solution in Nokia 6260.
After dis assembly of nokia 6260 you have to check if there is some carbon or rust. Clean whole the mother board of nokia 6260 with electronic cleaner for water damages.Apply heat with hot air and keep in mind it should not be too much. Because it can be dangerous for your skin and can also damage the mother board of nokia 6260.
Jumpers are given in red lines to solve nokia 6260 display light problem.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
Related Posts Plugin for WordPress, Blogger...

Mahbub Alfa Solution Headline Animator

Please Log in