Samsung Galaxy S4 Active Mini GT-I8580- How to Install I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy S4 Active Mini GT-I8580- How to Install I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware,I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware Last Updated on 24-Feb-2014. Samsung Galaxy S4 Active Mini GT-I8580 users can now update their device with the latest XXUANB1 Android 4.2.2 Jelly Bean official firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is I8580XXUANB1. However, the firmware is currently out for Russia. Hope the firmware will hit other part of the world soon. The device recently released with Android 4.2.2 Jelly Bean and already get firmware update. Here we have the latest available official firmware update for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.
Samsung Galaxy S4 Active Mini GT-I8580- How to Install I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware
As the Galaxy S4 Active Mini I8580 already running on Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 Active Mini I8580 to the latest XXUANB1 Android 4.2.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 XXUANB1 firmware on your Galaxy S4 Active Mini I8580 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy S4 Active Mini GT-I8580 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.2.2 Jelly Bean I8580XXUANB1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S4 Active Mini GT-I8580 model.

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 I8580XXUANB1 official firmware on Galaxy S4 Active Mini I8580.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Active Mini I8580 through Odin:

Samsung Galaxy S4 Active Mini GT-I8580- How to Install I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware
  1. Download Android 4.2.2 XXUANB1 Firmware for Galaxy S4 Active Mini I8580 from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy S4 Active Mini I8580 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy S4 Active Mini I8580 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I8580XXDLJ5_I8580ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
That’s all the above steps to update Android 4.2.2 Jelly Bean official firmware on Galaxy S4 Active Mini GT-I8580. Hope you successfully done the update process. If you followed everything as mentioned above, then your your Galaxy S4 Active Mini should now running on the latest Android 4.2.2 Jelly Bean build version XXUANB1. You can confirm the firmware update details from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.
No comments:

Samsung Galaxy Tab 3 10.1 GT-P5210- How to Install P5210ZCUANA1 Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy Tab 3 10.1 GT-P5210- How to Install P5210ZCUANA1 Android 4.2.2 Jelly Bean Firmware,P5210ZCUANA1 Android 4.2.2 Jelly Bean Firmware Last Updated on 24-Feb-2014. Samsung Galaxy Tab 3 10.1 GT-P5210 (WiFi) users can now update their device with the latest ZCUANA1 Android 4.2.2 Jelly Bean official firmware. Samsung recently rolled out an OTA update about the firmware. The latest firmware build version is P5210ZCUANA1. The device is running with Android 4.2.2 Jelly Bean from the release and there is no news about any further android version update for the Galaxy Tab 3 10.1 P5210. If you not yet updated your device with latest available firmware then do it now by following the tutorial below. The below guide will help you to download and install the P5210ZCUANA1 Android 4.2.2 Jelly Bean Firmware manually through Odin. You can also check the latest available firmware for your device through OTA (over the air) from Settings-About Tablet-Software Update.
Samsung Galaxy Tab 3 10.1 GT-P5210- How to Install P5210ZCUANA1 Android 4.2.2 Jelly Bean Firmware copy The Galaxy Tab 3 10.1 P5210 was released just few months back with Android 4.2.2 Jelly Bean and yet to receive Android 4.3 Jelly Bean or later android version. As the device already running on the Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update.
So, want to update your Galaxy Tab 3 10.1 P5210 to the latest ZCUANA1 Android 4.2.2 Jelly Bean firmware? For official way, either you can go for OTA update or download firmware through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.2.2 ZCUANA1 firmware on your Galaxy Tab 3 10.1 P5210 through Odin then follow the step by step manual update guide below.

Important Note:

“The firmware is released only for the Samsung Galaxy Tab 3 10.1 GT-P5210 model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet”.

Android 4.2.2 Jelly Bean P5210ZCUANA1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Tab 3 10.1 GT-P5210 model.

Pre-Requisites:

  • Check battery percentage, your device should have at least 80% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 P5210ZCUANA1 official firmware on Galaxy Tab 3 10.1 P5210.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Tab 3 10.1 P5210 through Odin:

Samsung Galaxy Tab 3 10.1 GT-P5210- How to Install P5210ZCUANA1 Android 4.2.2 Jelly Bean Firmware
  1. Download Android 4.2.2 ZCUANA1 Firmware for Galaxy Tab 3 10.1 P5210 from the above list
  2. Download Odin 3.09
  3. Switch off your Tablet and boot Galaxy Tab 3 10.1 P5210 into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode..
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Tab 3 10.1 P5210 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: P5210XXDLJ5_P5210ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your Tablet should automatically reboot after completion
  13. You can now disconnect your Tablet from computer
  14. Finish
So, Your Galaxy Tab 3 10.1 P5210 is ready now with the latest available firmware.  Hope you successfully update ZCUANA1 Android 4.2.2 Jelly Bean official firmware on Galaxy Tab 3 10.1 GT-P5210. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.2.2 Jelly Bean build version ZCUANA1. You can verify the firmware update details from Settings-About Tablet. For any queries feel free to contact with us any time and don’t forget to share your experience in the comment below.
No comments:

Samsung Galaxy Grand 2 Duos SM-G7102- How to Install G7102XXUANB2 Android 4.3 Jelly Bean Firmware

Samsung Galaxy Grand 2 Duos SM-G7102- How to Install G7102XXUANB2 Android 4.3 Jelly Bean Firmware,G7102XXUANB2 Android 4.3 Jelly Bean Firmware Last Updated on 24-Feb-2014. Samsung Galaxy Grand 2 Duos SM-G7102 recently received the latest XXUANB2 4.3 Jelly Bean official firmware update. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is G7102XXUANB2. The Galaxy Grand 2 Duos recently released by Samsung with Android 4.3 Jelly Bean out of the box and already get many firmware update. Here we have the latest available official firmware for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the G7102XXUANB2 Android 4.3 Jelly Bean firmware manually through Odin.
Samsung Galaxy Grand 2 Duos SM-G7102- How to Install G7102XXUANB2 Android 4.3 Jelly Bean Firmware copy
As the Galaxy Grand 2 Duos G7102 already running on the Android 4.3 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest Android 4.3 Jelly Bean firmware update. So, want to update your Galaxy Grand 2 Duos G7102 to the latest XXUANB2 Android 4.3 Jelly Bean firmware? To install in official way, either you can go for OTA update from Settings-About-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 XXUANB2 firmware on your Galaxy Grand 2 Duos G7102 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Grand 2 Duos SM-G7102 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.3 Jelly Bean G7102XXUANB2 Official Firmware Download List

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 G7102XXUANB2 official firmware on Galaxy Grand 2 Duos G7102.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy Grand 2 Duos G7102 through Odin:

 Samsung Galaxy Grand 2 Duos SM-G7102- How to Install G7102XXUANB2 Android 4.3 Jelly Bean Firmware
  1. Download Android 4.3 XXUANB2 Firmware for Galaxy Grand 2 Duos G7102 from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Grand 2 Duos G7102 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Grand 2 Duos G7102 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: G7102XXDLJ5_G7102ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats! you have completed the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy Grand 2 Duos SM-G7102. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Grand 2 Duos should now running on the latest Android 4.3 Jelly Bean build version XXUANB2. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.
No comments:

Samsung Galaxy Trend Plus GT-S7580- How to Install S7580XXUBNA4 Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy Trend Plus GT-S7580- How to Install S7580XXUBNA4 Android 4.2.2 Jelly Bean Firmware,S7580XXUBNA4 Android 4.2.2 Jelly Bean Firmware Last Updated on 24-Feb-2014. Samsung Galaxy Trend Plus GT-S7580 users can now update their device with the latest XXUBNA4 Android 4.2.2 Jelly Bean official firmware. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is S7580XXUBNA4. The Galaxy Trend Plus receiving Android 4.2.2 Jelly Bean regular firmware update from November 2013 and already received many official firmware update. Here we have the latest available firmware for the device. If you own the device and yet to update this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the S7580XXUBNA4 Android 4.2.2 Jelly Bean firmware manually through Odin.
Samsung Galaxy Trend Plus GT-S7580- How to Install S7580XXUBNA4 Android 4.2.2 Jelly Bean Firmware
If your Galaxy Trend Plus already running on the Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update.
So, want to update your Galaxy Trend Plus S7580 to the latest XXUBNA4 Android 4.2.2 Jelly Bean firmware? For official process, either you can go for   OTA (over the air) from Settings-About Phone-Software Update or download and update firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 XXUBNA4 firmware on your Galaxy Trend Plus S7580 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Trend Plus GT-S7580 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.2.2 Jelly Bean S7580XXUBNA3 Official Firmware Download List

Turkey: S7580XXUBNA3_S7580OJVANA5_TUR.zip
South Africa (Vodafone): S7580XXUBNA3_S7580OJVANA5_XFV.zip
Morocco: S7580XXUBNA3_S7580OJVANA5_FWD.zip
Morocco (MWD): S7580XXUBNA3_S7580OJVANA5_MWD.zip
Tunisia: S7580XXUBNA3_S7580OJVANA5_TUN.zip -

Previous Firmware Build

Samsung Galaxy Grand 2 Duos SM-G7102- How to Install G7102XXUANB2 Android 4.3 Jelly Bean Firmware
Samsung Galaxy Tab 3 10.1 GT-P5210- How to Install P5210ZCUANA1 Android 4.2.2 Jelly Bean Firmware
Samsung Galaxy S4 Active Mini GT-I8580- How to Install I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware
Samsung Galaxy S3 GT-I9300T Simple Tutorial Root I9300TDUUGNA4 Android 4.3 jelly bean Firmware

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 S7580XXUBNA4 official firmware on Galaxy Trend Plus S7580.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Trend Plus S7580 through Odin:

Samsung Galaxy Trend Plus GT-S7580- How to Install S7580XXUBNA4 Android 4.2.2 Jelly Bean Firmware
  1. Download Android 4.2.2 XXUBNA4 Firmware for Galaxy Trend Plus S7580 from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Trend Plus S7580 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Trend Plus S7580 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: S7580XXDLJ5_S7580ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats!  you have completed the tutorial to update latest Android 4.2.2 Jelly Bean official firmware on Galaxy Trend Plus GT-S7580. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Trend Plus should now running on the latest Android 4.2.2 Jelly Bean build version XXUBNA4. You can confirm the firmware update from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.
No comments:

Samsung Galaxy Grand Neo GT-I9168- How to Install I9168ZMUANB2 Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy Grand Neo GT-I9168- How to Install I9168ZMUANB2 Android 4.2.2 Jelly Bean Firmware,I9168ZMUANB2 Android 4.2.2 Jelly Bean Firmware Last Updated on 24-Feb-2014. Samsung Galaxy Grand Neo GT-I9168 users can now update their device with the latest ZMUANB2 Android 4.2.2 Jelly Bean official firmware. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is I9168ZMUANB2. The Galaxy Grand Neo recently announced by Samsung with Android 4.2.2 Jelly Bean and already received firmware update. Here we have the latest available official firmware for the device. If you own the device and yet to update this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the I9168ZMUANB2 Android 4.2.2 Jelly Bean firmware manually through Odin.
Samsung Galaxy Grand Neo GT-I9168- How to Install I9168ZMUANB2 Android 4.2.2 Jelly Bean Firmware copy

As the Galaxy Grand Neo already running on the Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update.
So, want to update your Galaxy Grand Neo I9168 to the latest ZMUANB2 Android 4.2.2 Jelly Bean firmware? For official process, either you can go for   OTA (over the air) from Settings-About Phone-Software Update or download and update firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 ZMUANB2 firmware on your Galaxy Grand Neo I9168 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Grand Neo GT-I9168 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.2.2 Jelly Bean I9168ZMUANB2 Official Firmware Download List

China: CHM-I9168ZMUANB2-20140221103004.zip

Previous Firmware Build

China: CHM-I9168ZMUANB1-20140211091316.zip

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 I9168ZMUANB2 official firmware on Galaxy Grand Neo I9168.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Grand Neo I9168 through Odin:

Samsung Galaxy Grand Neo GT-I9168- How to Install I9168ZMUANB2 Android 4.2.2 Jelly Bean Firmware
  1. Download Android 4.2.2 ZMUANB2 Firmware for Galaxy Grand Neo I9168 from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Grand Neo I9168 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Grand Neo I9168 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9168XXDLJ5_I9168ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats!  you have completed the tutorial to update latest Android 4.2.2 Jelly Bean official firmware on Galaxy Grand Neo GT-I9168. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Grand Neo should now running on the latest Android 4.2.2 Jelly Bean build version ZMUANB2. You can confirm the firmware update from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.
No comments:

Samsung GT-I9500 India INU- Android 4.4.2 Official Firmware Update guide

Samsung GT-I9500  India INU- Android 4.4.2 Official Firmware Update guide,I9500XXUFNB3 Android 4.4.2 KItKat official firmware for Samsung Galaxy S4 GT-I9500 is out and the users of India INU can now manually download the firmware zip file from here at NasirTech. Samsung time to time releasing software update for all their Android Smartphone and tablet devices and it is always recommended to update the latest available firmware as with every new firmware version Samsung introduces fixes for bugs (if any), improvement in overall OS performance and sometime introduces new features. Continue reading this page to find I9500XXUFNB3 download link along with flashing instructions and rooting guide (if available).
Samsung GT-I9500 India INU- Android 4.4.2 Official Firmware Update guide copy

I9500XXUFNB3 Firmware Details:

Model: GT-I9500
Model name: Galaxy S 4
Country: India
Version: Android 4.4.2
Changelist: 699287
Build date: Thu, 13 Feb 2014 11:33:19 +0000
Product Code: INU
PDA: I9500XXUFNB3
CSC: I9500ODDFNB3
MODEM: I9500DDUFNA4

I9500XXUFNB3 Download:

[Please don't ask for any other torrent download link for the above firmware. However, if the above link doesn't work, you can mention in comment below, we'll try to provide you with other download mirror (if available)]

How to Install I9500XXUFNB3 through Odin:

We have arrange a details step by step guide to manually install the I9500XXUFNB3 Android 4.4.2 KItKat firmware on Samsung Galaxy S4 GT-I9500. Open the below link for the flashing instructions.

Root I9500XXUFNB3 Firmware:

We have arrange a details step by step guide to root I9500XXUFNB3 Android 4.4.2 firmware running on Samsung GT-I9500. Open the below link for the rooting instructions.
How to Root I9500XXUFNB3 Android 4.4.2 Firmware
No comments:

Samsung Galaxy Note 3 SM-N9005- How to Install N9005XXUENB4 Android 4.4.2 KItKat Firmware

Samsung Galaxy Note 3 SM-N9005- How to Install N9005XXUENB4 Android 4.4.2 KItKat Firmware,N9005XXUENB4 Android 4.4.2 KitKat Firmware Last Updated on 24-Feb-2014. Samsung Galaxy Note 3 SM-N9005 (Snapdragon LTE) recently received the XXUENB4 4.4.2 Kitkat official firmware update. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is N9005XXUENB4. However, the firmware is currently out for Germany. Hope the firmware will hit other part of the world soon. The firmware can be update from Samsung Kies and also available for manual download. The Galaxy Note 3 was released with Android 4.3 Jelly Bean and started received firmware update soon after the release. The device already get the Android 4.4.2 KitKat update and here we have the latest available official  firmware for the device. If you yet to update this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the N9005XXUENB4 Android 4.4.2 KitKat firmware manually through Odin.

Root N9005XXUENB4  


http://androidsbd.com/wp-content/uploads/2014/02/Samsung-Galaxy-Note-3-SM-N9005-How-to-Install-N9005XXUENB4-Android-4.4.2-KItKat-Firmware
Android 4.4.2 KitKat is definitely a great update for the Samsung Galaxy Note 3 N9005 users as they are eagerly waiting for great features that coming with this latest update.
 Android 4.4.2 KitKat comes with many new features than the previous Android 4.3 Jelly Bean, some includes- Camera shortcut on lockscreen, White icons in status bar, Performance improvements, Transparent status bar, Improved keyboard layout in landscape orientation, Select between the stock messaging app or Hangouts for SMS and MMS, Select between TouchWiz or other launchers through settings, Wireless printing, Updated Google apps and many more.
So, want to update your Galaxy Note 3 N9005 to the latest XXUENB4 Android 4.4.2 KitKat firmware? There are two official way to update the firmware, either check and update via   OTA (over the air) from your phone settings, go to Settings-General-About-Software Update or download and update through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.4.2 XXUENB4 firmware on your Galaxy Note 3 N9005 via Odin, then follow this step by step tutorial.

Important Note:

“The firmware is released only for the Samsung Galaxy Note 3 SM-N9005 model, so don’t try this in any other android device. Check your device model number from Settings-General-About. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.4.2 KitKat N9005XXUENB4 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 3 SM-N9005 model.
Germany DBT:
N9005XXUENB4_N9005DBTENB1_DBT.zip  |  DBT-N9005XXUENB4-20140224182210.zip
France: N9005XXUENB4_N9005OXXENB1_XEF.zip  |  Link2
Singapore (SingTel): N9005XXUENB4_N9005OLBENA3_SIN.zip  |  Link2
Singapore: N9005XXUENB4_N9005OLBENA3_MM1.zip   |  Link2
Malaysia: N9005XXUENB4_N9005OLBENA3_XME.zip  |  Link2
Singapore: N9005XXUENB4_N9005OLBENA3_XSP.zip  |  Link2
Thailand: N9005XXUENB4_N9005OLBENA3_THL.zip  |  Link2
Singapore (StarHub): N9005XXUENB4_N9005OLBENA3_STH.zip  |  Link2
South East Europe: SEE-N9005XXUENB4-20140227180554.zip

Pre-Requisites:

 Samsung Galaxy Note 3 SM-N9005- How to Install N9005XXUENB4 Android 4.4.2 KItKat Firmware
  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 3 and tap Build Number for 7 times to visible the Developer options.) See the image above
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.4.2 N9005XXUENB4 official firmware on Galaxy Note 3 N9005.

How to Update Android 4.4.2 KitKat Official Firmware on Galaxy Note 3 N9005 via Odin:

Samsung Galaxy Note 3 SM-N9005- How to Install N9005XXUENB4 Android 4.4.2 KItKat Firmware
  1. Download Android 4.4.2 XXUENB4 Firmware for Galaxy Note 3 N9005 from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Note 3 N9005 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 N9005 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N9005XXDLJ5_N9005ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats! You have finish updating your device. Hope you successfully completed the tutorial to update Android 4.4.2 KitKat XXUENB4 official firmware on Galaxy Note 3 SM-N9005. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.4.2 KitKat build version XXUENB4. You can verify the firmware update details from Settings-General-About. If you have any queries, feel free to contact with us using the comment form below and also share how you find the tutorial.
No comments:

Samsung Galaxy Core LTE SM-G386F- How to Install G386FXXUANB4 Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy Core LTE SM-G386F- How to Install G386FXXUANB4 Android 4.2.2 Jelly Bean Firmware,G386FXXUANB4 Android 4.2.2 Jelly Bean Firmware Last Updated on 24-Feb-2014. Samsung Galaxy Core LTE SM-G386F recently received the XXUANB4 Android 4.2.2 Jelly Bean official firmware update. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is G386FXXUANB4. However, the firmware is currently released for Austria (A1). Hope the firmware will heat other part of the world soon.. The device already get firmware update and here we have the latest official firmware. If you wish to update your device with this latest firmware, then you can now update the same using our simple tutorial below. The below guide will help you to download and install the G386FXXUANB4 Android 4.2.2 Jelly Bean Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.
Samsung Galaxy Core LTE SM-G386F- How to Install G386FXXUANB4 Android 4.2.2 Jelly Bean Firmware
If your Galaxy Core LTE G386F already running on Android 4.2.2 Jelly Bean, then you can only expect few bug fixes and performance enhancement with this latest firmware update.
So, want to update your Galaxy Core LTE G386F to the latest XXUANB4 Android 4.2.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 XXUANB4 firmware on your Galaxy Core LTE G386F through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Core LTE SM-G386F model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.2.2 Jelly Bean G386FXXUANB4 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Core LTE SM-G386F model.

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 G386FXXUANB4 official firmware on Galaxy Core LTE G386F.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Core LTE G386F through Odin:

Samsung Galaxy Core LTE SM-G386F- How to Install G386FXXUANB4 Android 4.2.2 Jelly Bean Firmware
  1. Download Android 4.2.2 XXUANB4 Firmware for Galaxy Core LTE G386F from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Core LTE G386F into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Core LTE G386F to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: G386FXXDLJ5_G386FODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats! you have finish the tutorial to update Android 4.2.2 Jelly Bean official firmware on Galaxy Core LTE SM-G386F. Hope you successfully done the update process. If you followed everything as mentioned above, then your your Galaxy Core LTE should now running on the latest Android 4.2.2 Jelly Bean build version XXUANB4. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, the feel free to contact with us using the comment form below.
No comments:

Samsung Galaxy Note 3 Neo SM-N7500Q- How to Install N7500QXXUANB1 Android 4.3 Jelly Bean Firmware

Samsung Galaxy Note 3 Neo SM-N7500Q- How to Install N7500QXXUANB1 Android 4.3 Jelly Bean Firmware,N7500QXXUANB1 Android 4.3 Jelly Bean Firmware Last Updated on 25-Feb-2014. You can now update the XXUANB1 4.3 Jelly Bean official firmware on Samsung Galaxy Note 3 Neo SM-N7500Q. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is N7500QXXUANB1. However, the firmware is currently out for Turkey. Hope the firmware will hit other part of the world soon. The Galaxy Note 3 Neo N7500Q recently released by Samsung with Android 4.3 Jelly Bean out of the box and this is the first official firmware update for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below step by step guide will help you to download and flash the  latest N7500QXXUANB1 Android 4.3 Jelly Bean Firmware manually through Odin.
Samsung Galaxy Note 3 Neo SM-N7500Q- How to Install N7500QXXUANB1 Android 4.3 Jelly Bean Firmware copy
As the Galaxy Note 3 Neo N7500Q already running on Android 4.3 Jelly Bean, you can expect few bug fixes and performance enhancement with this latest firmware update.

 So, want to update your Galaxy Note 3 Neo N7500Q to the latest XXUANB1 Android 4.3 Jelly Bean firmware? For official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 XXUANB1 firmware on your Galaxy Note 3 Neo N7500Q through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Note 3 Neo SM-N7500Q model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.3 Jelly Bean N7500QXXUANB1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 3 Neo SM-N7500Q model.
Turkey: TUR-N7500QXXUANB1-20140218115850.zip
[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 N7500QXXUANB1 official firmware on Galaxy Note 3 Neo N7500Q.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7500Q through Odin:

Samsung Galaxy Note 3 Neo SM-N7500Q- How to Install N7500QXXUANB1 Android 4.3 Jelly Bean Firmware
  1. Download Android 4.3 XXUANB1 Firmware for Galaxy Note 3 Neo N7500Q from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Note 3 Neo N7500Q into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 Neo N7500Q to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7500QXXDLJ5_N7500QODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
So, you have just finished the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy Note 3 Neo SM-N7500Q. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.3 Jelly Bean build version XXUANB1. You can verify the firmware update details from Settings-About Phone. So, enjoy all the new features and improvements on your device and don’t forget to share your experience in the comment below.
No comments:

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNB2 Android 4.4.2 KitKat Firmware

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNB2 Android 4.4.2 KitKat Firmware,N900XXUDNB2 Android 4.4.2 KitKat Firmware Last Updated on 25-Feb-2014. You can now update the latest XXUDNB2 4.4.2 KitKat official firmware on Samsung Galaxy Note 3 SM-N900. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is N900XXUDNB2. However, the firmware is currently released for Russia. Hope the firmware will hit other part of the world soon. The Galaxy Note 3 was released with Android 4.3 Jelly Bean and started received firmware update soon after the release. The device already get KitKat firmware update and here we have the latest official Android 4.4.2 KitKat firmware. If you own the device and yet to update this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the N900XXUDNB2 Android 4.4.2 KitKat Firmware manually through Odin.

Root N900XXUDNB2

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNB2 Android 4.4.2 KitKat Firmware
Android 4.4.2 KitKat is definitely a great update for the Samsung Galaxy Note 3 N900 users as they are eagerly waiting for great features that coming with this latest update.
 Android 4.4.2 KitKat comes with many new features than the previous Android 4.3 Jelly Bean, some includes- Camera shortcut on lockscreen, White icons in status bar, Performance improvements, Transparent status bar, Improved keyboard layout in landscape orientation, Select between the stock messaging app or Hangouts for SMS and MMS, Select between TouchWiz or other launchers through settings, Wireless printing, Updated Google apps and many more.
So, want to update your Galaxy Note 3 N900 to the latest XXUDNB2 Android 4.4.2 KitKat firmware? There are two official way to update the firmware, either check and update via   OTA (over the air) from your phone settings, go to Settings-General-About-Software Update or download and update through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.4.2 XXUDNB2 firmware on your Galaxy Note 3 N900 via Odin, then follow this step by step tutorial.

Important Note:

“The firmware is released only for the Samsung Galaxy Note 3 SM-N900 model, so don’t try this in any other android device. Check your device model number from Settings-General-About. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.4.2 KitKat N900XXUDNB2 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 3 SM-N900 model.
[Firmware for rest of the countries will be added here when available]

Previous Firmware Build

Samsung Galaxy Win GT-I8552- How to Install I8552XXANB1 Android 4.1.2 Jelly Bean Firmware

Pre-Requisites:

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNB2 Android 4.4.2 KitKat Firmware
  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 3 and tap Build Number for 7 times to visible the Developer options.) See the image above
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.4.2 N900XXUDNB2 official firmware on Galaxy Note 3 N900.

How to Update Android 4.4.2 KitKat Official Firmware on Galaxy Note 3 N900 via Odin:

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNB2 Android 4.4.2 KitKat Firmware
  1. Download Android 4.4.2 XXUDNB2 Firmware for Galaxy Note 3 N900 from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 N900 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N900XXDLJ5_N900ODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats! You have finish updating your device. Hope you successfully completed the tutorial to update Android 4.4.2 KitKat XXUDNB2 official firmware on Galaxy Note 3 SM-N900. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.4.2 KitKat build version XXUDNB2. You can verify the firmware update details from Settings-General-About. If you have any queries, feel free to contact with us using the comment form below and also share how you find the tutorial.
No comments:

Samsung Galaxy Note 3 SM-N900- Simple Tutorial how to Root N900XXUDNB2 Android 4.4.2 Firmware

amsung Galaxy Note 3 SM-N900- Simple Tutorial how to Root N900XXUDNB2 Android 4.4.2 Firmware,A simple method to root N900XXUDNB2 Android 4.4.2 KitKat Firmware is now available at NasirTech. Samsung Galaxy Note 3 SM-N900 recently get updated to the N900XXUDNB2 4.4.2 KitKat Firmware. If you yet to update the firmware, then update the same by following the above link. Hope you updated this latest firmware on your device and now you can root the XXUDNB2 firmware using our simple tutorial below. The below guide will help you to root N900XXUDNB2 4.4.2 KitKat Firmware running on Galaxy Note 3 SM-N900. Continue reading the tutorial for complete guide.
After updating official firmware, your device no longer belongs to rooted device. So, after official firmware update, many of us prefer to root our device to enjoy some additional features that unrooted android device doesn’t offer. With a rooted android device, you can install apps that ask root permission, flash various custom ROMs, install MODs and tweak various features. Root removes default bloatware apps that free-up lots of memory space and extend the battery life. However, once rooted, manufacturer warranty will be void. But you can regain the warranty by following proper unroot process. To know more about benefits of rooting android device, read- Complete Note on What is Rooting and Benefits of Rooting Android Phone.
 Samsung Galaxy Note 3 SM-N900- Simple Tutorial how to Root N900XXUDNB2 Android 4.4.2 Firmware
So, want to root Galaxy Note 3 SM-N900 Running N900XXUDNB2 4.4.2 KitKat Firmware? Continue reading this page to get all the necessary steps to successfully root your device. The root file (CF-Auto-Root) we used in this tutorial is safe and have nearly 100% success rate. We’ll use Odin software to flash the root file.
The tutorial is made with simple step by step guide, so that even an android newbie user can follow and successfully root his/her device. However, in this process you may loss your personal data and settings. So, we recommend you to follow all the backup instructions before proceed to rooting guide.

Warning!

  • This rooting tutorial is only applicable for Samsung Galaxy Note 3 SM-N900 model (ha3g). So, don’t try this in any other android device. Check your device model number from- Settings-About Phone.
  • Rooting voids your phone’s manufacturer warranty. However, you can get back the warranty anytime by following proper unroot process or by flashing official firmware.
  • This guide is for educational purpose and you should try this at your own risk. We are not responsible if your device experience a soft brick after following this tutorial.

Pre-Requisites:

  • Check battery percentage, charge your device to a decent level of at least 60% battery power. Your device should not turn off during installation.
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver
All the above pre-requisites are very important and must be followed before proceed to installation guide. Hope you get all the above points and done as mentioned. Now, you are ready to move to the final step of this tutorial where we have arranged a step by step details guide to root Galaxy Note 3 SM-N900 running  N900XXUDNB2 4.4.2 KitKat firmware.

Steps to Root Galaxy Note 3 SM-N900 Running N900XXUDNB2 4.4.2 KitKat through Odin:

Samsung Galaxy Note 3 SM-N900- Simple Tutorial how to Root N900XXUDNB2 Android 4.4.2 Firmware
  1. Download CF-Auto-Root for Galaxy Note 3 N900 and extract the Zip file: CF-Auto-Root-t03g-t03gxx-gtN900.zip
  2. Download Odin 3.09 and extract the Zip file: Odin3_V3.09.Zip
  3. Now, Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons together (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 N900 to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, click on the AP button and select the CF-Auto-Root-t03g-t03gxx-gtN900.tar.md5 file.
  9. Finally, click on the Start button to begin the rooting process, wait few moments.
  10. Once completed, you would see “PASS!” message in ID:COM port having green background
  11. Your phone should automatically reboot after completion
  12. You can now disconnect your phone from computer
  13. Finish
Congrats! You have completed the tutorial to root Galaxy Note 3 N900 running N900XXUDNB2 4.4.2 KitKat Firmware. Hope you successfully done the rooting process. If you followed everything as mentioned in the above tutorial, then your Galaxy Note 3 N900 should now rooted and you have complete control over your device. Now, install apps that ask root permission or flash various custom ROMs. To verify your device is rooted or not, you can download and run the Root Checker App from Google Play Store. If you have any doubt or query about the tutorial, feel free to contact with us using the comment form below, and share your rooting experience with us.
No comments:

Samsung Galaxy Note 3 Neo LTE SM-N7505L- How to Install N7505LUBUANB1 Android 4.3 Jelly Bean Firmware

Samsung Galaxy Note 3 Neo LTE SM-N7505L- How to Install N7505LUBUANB1 Android 4.3 Jelly Bean Firmware,N7505LUBUANB1 Android 4.3 Jelly Bean Firmware Last Updated on 25-Feb-2014. You can now update the UBUANB1 4.3 Jelly Bean official firmware on Samsung Galaxy Note 3 Neo SM-N7505L. Samsung recently started rolling out an OTA update about the firmware. The Galaxy Note 3 Neo N7505L recently released by Samsung with Android 4.3 Jelly Bean out of the box and this is the first official firmware update for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below step by step guide will help you to download and flash the latest N7505LUBUANB1 Android 4.3 Jelly Bean Firmware manually through Odin.
Samsung Galaxy Note 3 Neo LTE SM-N7505L- How to Install N7505LUBUANB1 Android 4.3 Jelly Bean Firmware
As the Galaxy Note 3 Neo N7505L already running on Android 4.3 Jelly Bean, you can expect few bug fixes and performance enhancement with this latest firmware update.

 So, want to update your Galaxy Note 3 Neo N7505L to the latest UBUANB1 Android 4.3 Jelly Bean firmware? For official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 UBUANB1 firmware on your Galaxy Note 3 Neo N7505L through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Note 3 Neo SM-N7505L model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.3 Jelly Bean N7505LUBUANB1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 3 Neo SM-N7505L model.
Peru: PET-N7505LUBUANB1-20140225213115.zip
Dominican Republic (Claro): CDR-N7505LUBUANB1-20140225213023.zip
[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage- follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 N7505LUBUANB1 official firmware on Galaxy Note 3 Neo N7505L.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:

Samsung Galaxy Note 3 Neo LTE SM-N7505L- How to Install N7505LUBUANB1 Android 4.3 Jelly Bean Firmware
  1. Download Android 4.3 UBUANB1 Firmware for Galaxy Note 3 Neo N7505L from the above list
  2. Download Odin 3.09
  3. Switch off your phone and boot Galaxy Note 3 Neo N7505L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Note 3 Neo N7505L to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
  9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7505LXXDLJ5_N7505LODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
So, you have just finished the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy Note 3 Neo SM-N7505L. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.3 Jelly Bean build version UBUANB1. You can verify the firmware update details from Settings-About Phone. So, enjoy all the new features and improvements on your device and don’t forget to share your experience in the comment below.
No comments:
Subscribe to: Posts (Atom)
Related Posts Plugin for WordPress, Blogger...

Mahbub Alfa Solution Headline Animator

Mahbub Alfa Solution

↑ Grab this Headline Animator

Please Log in