Nokia C2-07 Lcd Display Problem Solution Ways Jumpers

Nokia C2-07 Blank Lcd Display, Nokia C2-07 White Lcd Display, Nokia C2-07 Lcd Jack Damage Prints Missing.
Tools:-
To solve lcd display problem in Nokia C2-07 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-07
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.Nokia 105 Battery Terminals Point Problem Jumper Ways
Nokia C2-07 Lcd Display Problem Solution Ways Jumpers

Diagnosting & Solution:
After disassemble of Nokia C2-07 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia Asha 200 Insert Sim Problem Solution Jumpers Ways.

Nokia Asha 200 have two stand by sims in it.if you are facing insert sim problem in Asha 200 for both sims or a single sim is not working here is the diagram that will help you to solve this problem in Asha 200.Nokia e52 dead due to shortage or water damages

In diagram you can see there are multiple lines with different colors that are indicating different sim points and there path to different parts you can check these path and if any of them is broken then you can make jumpers to them. if any part is not at the same place and have broken due to water damage or something else then you can see some points can also be scratched. So scratch them slightly and make jumper at that point.
Big round points on lines shows that you can make jumper on that point.
a big thanks to Mr Tuseef Ahmed for sending this diagram to us.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2-07 Mic Problem Solution Jumper Ways Microphone

Nokia C2-07 Mic not working, Microphone is not working in Nokia C2-07, Voice is missing and can not reach to destination Mobile Phone, Mic problem, Microphone Solution in Nokia C2-07,Nokia C1-01 Insert sim problem solution jumper ways Nokia C2-07 Mic Problem Solution Jumper Ways Microphone
Tools:-
Nokia T5 and T4 for disassemble.
Universal Microphone.
Electronics Cleaner.
Hot Air.
Electronics Meter.
Solding iron.
Diagnostics & Solutions:-
Before Disassemble of Nokia C2-07 make sure that mic whole in Cassing ( housing ) is opened. And here is not any dust in it. Disassemble the mobile phone and remove mic microphone from mother board with solding iron.
Check points on mother board with miter and if any value is missing check all these parts that are given in red and blue color in above diagram.If any of them is missing apply jumpers as described in above repairing picture.
Replace new mic and apply jumpers to its negative and positive points. On the mother board Red color line shows ground print and Blue line indicates positive print of mic. So this will help you to solve mic problem in nokia C2-07
Warnings:-
Apply solder on mic and Remove mic when it too hot so that mic print remain OK.
Don’t apply much heat with hot air it can damage the mother board.
Assemble with focus because if mic is not in its proper place voice will not reach to destination mobile. Or you will not be able to record voice in it.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2-07 MMC Memory Card Problem Solution Ways

Nokia C2-07 MMC is not working or it do not accept memory card it can be cause of water damage and rust. It can be due to MMC jack and damage pins. And this problem can be reason of MMC I.C So lets check all these parts and try to Repair Memory card Problem in Nokia C2-07.Nokia e52 insert sim fake charging and light solution
Nokia C2-07 MMC Memory Card Problem Solution Ways

The above diagram have a red line to show you which parts are used in Memory Card function so check these parts and in first step try to clean them with electronics cleaner and apply some hot air to dry it.
Once it is dry check and if not working then replace this I.C to solve memory card problem in Nokia C2-07.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia X2 Battery Terminals Point Problem Jumper Ways

Nokia X2-00 Battery Terminal Points Damage Ways Problem Solution if in Nokia X2-00 during changing battery terminal points you have loss battery points then you can solve this problem with this diagram bellow posted in this post.Nokia C1-01 Jumper solution for light problem
Nokia X2 Battery Terminals Point Problem Jumper Ways

there are three different color lines in this post shows that how you can make jumpers so check these links with meter and if any of them is broken make these jumpers with insulation wire.this diagram can help you in case Nokia X2-00 is dead you can check these links so that battery crunt can pass through right ways and can be set on off.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Nokia x2 hand free open problem jumpers solution

Nokia X2-00 handfree problem, hand free singe, hand free open, can be solve with this diagram that I am going to post in this post bellow. look at the diagram and these two ic and there near about area if you find some rust water damage or carbon here you can clean the board and dry it.
Nokia C1-01 Light Problem Solution in 6 Steps Tested
Nokia x2 hand free open problem jumpers solution
Once it is cleaned resold these parts and if problem is not solve remove first ic and make jumpers as defined in diagram and replace 2nd part to solve hand free problem in nokia X2-00.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams. some related post are also given bellow you can read them also for more information about cell phone.

nokia 101 insert sim 1 solution

if nokia 101 insert sim 1 is not working then it can be fault of missing tracks and path. Parts can be damage due to water damage and rust so after dis assemble of mobile phone make it clean with electronics cleaner and apply hot air to make it dry.Memory Card problem solution for Nokia C1-01 MMC Jumper Ways
nokia 101 insert sim 1 solution
In above diagram you can see different color lines that are used in sim functions. Check these tracks with meter and if any of them is missing apply these jumpers to solve insert sim problem in nokia 101.

Nokia 100 Mic Problem Solution Jumper Ways

Mic Problem in Nokia 100, Mic is not working, Low Mic voice to destination,Microphone problem.
Tools:-
Nokia Key T4 and T5 for disassemble.
Electronics Cleaner for cleaning carbon or water damages.
Hot air to dry the mother board.
Solding Iron for applying jumpers.Nokia C1-01 Not Charging Solution with Jumpers
Nokia 100 Mic Problem Solution Jumper Ways
Solution & Diagnostics:-
Disassemble the mobile phone and look at the mother board.
If there is some rust or carbon then apply electronics cleaner and clean it.
Apply hot air to make it dry and test again.
Try with replacing mic with new one.
Check microphone point on the mother board and if value did not exist.
Different color lines are given to indicate whole track and paths of mic ( microphone ) function in Nokia 100.
Check all points that are described in above diagram and if any track out of them is missing apply jumpers as shown in above diagram for solving mic problem in Nokia 100.
You may have to change audio IC.
Warnings & Tips:-
Do not apply much heat with hot air it can be harm for your skin.
Apply jumpers carefully so that it would not be short with other.
After cleaning with cleaner make it dry proper.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 5250 Touch Screen Problem Solution Jumper Ways

this diagram is about touch screen problem in Nokia 5250 . In case of touch screen problem we can not use any key and we can not manage keypad and mobile functions.to solve touch screen problem in Nokia 5250 you can follow a few steps as given bellow.Nokia C1-01 Light Solution for LED Keypad and LCD solution


after dis assambling of Nokia 5250 check touch screen jack on board if there is some carbon or water damage then clean it with electronics cleaner and apply a light heat with hot air so that it can be dry.once its totally dry check touch screen.
if touch screen of Nokia 5250 will not be solve with above method check all track and parts as shown in above diagram.in diagram all tracks are given with different colors and you can easily find whole track and path.
if any path is damage or broken apply jumpers as shown and replace parts as given in diagram.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 5250 Keypad Not Working Jumper Problem Solution.

In nokia 5250 keypad problem can be due to rust carbon or water damage. in this case keypad parts can be damage or keypad track can be missed from any point. for solving keypad problem in nokia 5250 you can see diagram bellow.Nokia C1-01 Hand Free Open Problem Solution Jumper Ways

In above diagram there are two main paths these are used for keypad functions and these are controlling keypad options.these red and blue color lines are describing tracks.
For this post you only can clean the board ic and keypad if there is some rust or carbon. you can resold these two parts and can replace these two ic for keypad problem in nokia 5250.
For more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams. Some related post are also given bellow you can read them also for more information about cell phone

Nokia 5250 Key Pad Lock is Not Working.

keypad lock is used for security reasons in nokia 5250.if it is not working in phone you ill not be able to use phone keys.it can be due to water damage carbon or rust.so if you have keypad problem in nokia 5250 look at diagram bellow and check these parts.nokia C1-01 speaker ear piece problem solution jumper ways


in above diagram you can see green and red lines these are tracks of keypad lock button.green color point is indicating ground prints while red is a positive point.you can check these points and parts if track is missing apply jumpers as shown in above diagram.if track is ok then replace keypad lock button to solve this issue in nokia 5250.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 5250 LCD Display problem Ic Solution

White display blank display in Nokia 5250 can be due to water damage or damae of thee ic(s) in cell phone.so look at diagram bellow and be satisfide about these parts in first step.in diagram below you can see lcd display jack and display ic in red lines.Nokia C1-01 Local Mode Test mode problem solution

if these parts components are broken and damage then replace htem to solve display problem in nokia 5250.it will solve white display blank display problem in cell pohone.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 110 LCD Display Problem Ways Jumpers

Nokia 110 display problem can be cause of white or blank LCD display.it can be due to water damages or carbon rust.so if you want to solve lcd display problem in nokia 110 look at diagram bellow and follow these simple steps.there are a few different color lines that describe tracks of lcd ways.Nokia X2-02 Insert Sim Problem Solution Jumper Ways



remove lcd and clean points on board with electronics cleaner.Clean also resistance and parts as shown in above diagram.try to re sold this lcd and if display can not be in original condition replace it with new LCD.
you can check all these tracks with multi meter and if any of them is not working or missing apply these jumpers.print number 10 and 11 are used for light function so if lcd light is not working or is blank then check these two prints.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 110 Not Charging Problem Solution Jumper Ways

when we plugin charging pin into charging jack of Nokia 110 and it do not shows any thing it can be fault of missing track or parts in it and can be fault of charging base.While if it shows not charging then it can be reason of water damages or low volt.so here is a diagram to help you to understand charging parts and there tracks.Nokia Asha 200 Keypad Ways Jumpers Track Path

look at above diagram and clean all these parts which are given in it.clean all these parts and apply hot air to dry the board.Check these parts with meter and if path is missing apply jumpers as given in above diagram solution.to Fix charging problem you can replace charging base also.Red line shows positive track of charging function while blue is a ground print.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 111 LCD Display Problem Ways Jumpers

Nokia 111 display problem can be cause of white or blank LCD display.it can be due to water damages or carbon rust.so if you want to solve lcd display problem in nokia 111 look at diagram bellow and follow these simple steps.there are a few different color lines that describe tracks of lcd ways.Nokia Asha 303 LCD Light Problem ways Led Jumper Solution


remove lcd and clean points on board with electronics cleaner.Clean also resistance and parts as shown in above diagram.try to re sold this lcd and if display can not be in original condition replace it with new LCD.
you can check all these tracks with multi meter and if any of them is not working or missing apply these jumpers.print number 10 and 11 are used for light function so if lcd light is not working or is blank then check these two prints.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 111 Mic Problem Jumpers Ways Solution

Nokia 111 have mic problem our voice can not reach to destination and we can not record voice in it.mic problem can be reason of parts damages or carbon rust and water damages.so to solve this issue in Nokia 111 look at diagram bellow and check all these components and parts.these parts are used in Microphone function in Nokia 111.nokia Asha 303 Mic Problem Solution Jumper Ways


once you have dis assembled mobile phone look at board vary carefully and check if there is some rust or carbon.Clean
these parts and area with electronics cleaner and leave it to dry for a few mints with hot air.In above diagram all tracks are given in red and blue colors.these tracks show positive and negative paths of mic parts.so check these components and paths with electronics miter and if path missing apply jumpers.
Because mic is attached with board so you can remove it with solding iron by applying much solder on mic and then slip it once it is too hot.And use new mic to fix mic problem in Nokia 111.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 111 Ringer Problem Jumpers Ways Solution

Nokia 111 Ringer Speaker problem can be reason of faulty ringer.It can be due to water damages and carbon.In some cases this problem can be due to parts or components broken ways.if Nokia 111 have Ringer Speaker problem it can not ring bells ringtones or low ring tones voice.nokia Asha 303 Ringer Problem Jumper Ways Solutions


So change ringer and check it.In above diagram there are two red and blue lines.These lines show ringer function tracks check them with electronic meter and if any print is missing apply jumpers as given in diagram.
Some time it can be cause of non proper fitting of ringer so check its fitting also when assembling Nokia 111.red and blue lines in diagram shows positive and negative links.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 111 Network Problem Solution Jumper Ways

f you have network low signals problem in Nokia 111 you can fix this problem with a few steps as given in diagram bellow.Nokia 111 network problem can be cause of missing components or water damages.In this problem would no be able to make Voice calls or it may drop call during calls automatically.nokia 1661 Light without Ic Display Keypad Led jumper tested


in above diagram there are two different color lines that shows full track of components and parts which are used in network signal function.Check all these track and parts to solve Signal problem in Nokia 111 and if some path missing apply jumpers as given in above diagram.
You can resold PA also to fix network problem in Nokia 111.we will soon update this post with P.A jumpers.so that you can solve network problem without power amplifier.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 111 Not Charging Problem Solution Jumper Ways

when we plugin charging pin into charging jack of Nokia 111 and it do not shows any thing it can be fault of missing track or parts in it and can be fault of charging base.While if it shows not charging then it can be reason of water damages or low volt.so here is a diagram to help you to understand charging parts and there tracks.nokia x2-01 hand free open problem jumpers solution

look at above diagram and clean all these parts which are given in it.clean all these parts and apply hot air to dry the board.Check these parts with meter and if path is missing apply jumpers as given in above diagram solution.to Fix charging problem you can replace charging base also.Red line shows positive track of charging function while blue is a ground print.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 110 Local Test Mode Problem Solution Jumper Solution

some time we get test mode local problem in our mobile display and in this case we can not use cell

phone keypad and other functions.if you have same problem then diagram bellow will help you to solve
this problem. In above diagram you can see a red line box to show the exact location of resistance
which is used in problem solution of test mode in nokia 110.How To Jumper KeyPad IC in Nokia 1661 if a set of keys is not working Problem solution Ways Tested.

Once phone has been disassembled you can clean whole mother board for rust or carbon.Leave it to dry
and apply hot air.Replace indicated resistance and also check components behind battery terminals.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2-03 Camera Standby Notworkin Problem Solution Jumper Ways

Nokia C2-03 Camera Problem, Nokia C2-03 Camera Standby Mode can be cause of water damage or breakage. To solve this problem in the mobile phone you can follow a few steps that i am going to describe in this post.nokia Asha 303 Touch is not working problem Solution Jumper Ways
Nokia C2-03 Camera Standby Not working Problem Solution Jumper Ways
In first step restore factory setting in Nokia C2-03. Then make a full flash (software firmware) installation. And the third step is to check hardware diagnostings. After dis assambly of phone check the whole mother board carefully.If there is some rust or carbon on board then clean it with electronics cleaner and apply some heat with hot air. So that the mother board can be dry.
If mother board can not be full dry it can create carbon in future so keep in mind it should be dry.Do not apply much heat as it can harm your skin and mother board of cell phone.
In above diagram as you can see there are different color lines. These lines are indicating tracks that are used in camera function so check these paths and apply jumpers as shown in above diagram.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2-03 Not Charging Problem jumpers Ways Solutions

1-Nokia C2-03 not charging problem.
2-Nokia C2-03 Do not show charging.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-charging base if old one is damage.
6-old board of Nokia C2-03 if a few parts are damage in this board.So that they can be replaced.
7- Charger to diagnostic it.nokia Asha 303 Full PCB Diagram Mother Board Layout.
Nokia C2-03 Not Charging Problem jumpers Ways Solutions
Solution:-
1-Plugin charging pin in charging jack and check.
2-if charging symbol is not appearing in display it can be fault of missing track pr charging jack.
3-change battery and check again.
4-if Not charging symbol appear on display it can be fault of r22 or 24k resistance.
5-Disassamble Nokia C2-03 and look at whole mother board carefully for rust or carbon.
6-Clean carbon area and the area shown in above diagram with electronics cleaner.
7-Apply heat with hot air so that it can be totally dry.
8-Do not apply to much heat it can be harm for your skin and mobile as well.
9-chek all these tracks as shown in the above diagram and if any path is missing apply jumpers.
10-if parts are missing or damage replace them.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
At time of assembling keep in mind about fitting. If fitting is not proper charging jack will not attach and it will not show charging and will not start charging.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2-03 Voluem Up Down Keys Not Working Problem Solution Jumpers

1-Nokia C2-03 Volume Up Key is Not Working.
2-Nokia C2-03 Volume Down Key is Not Working.
Tools:-
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
4-Electronics cleaner.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Nokia C2-03 if a few parts are damage in this board.So that they can be replaced.Nokia X2-02 Not Charging Problem Solution Ways
Nokia C2-03 Volume Up Down Keys Not Working Problem Solution Jumpers
Solution:-
If Volume Up or Down key is not working in Nokia C2-03 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Warnings:
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.

Nokia C2-03 Full PCB Diagram Mother Board Layout.

Nokia C2-03 Full PCB cellphone Diagram Mother Board Layout.
Here is the cellphone diagram of Nokia C2-03 PCB.so i will add some more cellphone diagram in high resolution so that you can add some more repairing trick for,Nokia X2-02 Not Charging Problem Solution Ways Nokia C2-03 Full PCB Diagram Mother Board Layout-m

High Resolution

Download High Resolution Diagram of Nokia C2-03

Nokia C2-03 if you find some new repairing techniques please must email me and i will post that diagram with your reference in this way we all make it possible “REPAIRING MADE EASY” the basic point of www.u2ugsm.com
Thanks
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2-03 MMC Memory Card Problem Solution Ways

if Nokia C2-03 MMC is not working or it do not accept memory card it can be cause of water damage and rust. It can be due to MMC jack and damage pins. And this problem can be reason of MMC I.C So lets check all these parts and try to Repair Memory card Problem in Nokia C2-03.Nokia X2-02 Mic is Not Working Problem Solution Jumper Ways
Nokia C2-03 MMC Memory Card Problem Solution Ways

The above diagram have a red line to show you which parts are used in Memory Card function so check these parts and in first step try to clean them with electronics cleaner and apply some hot air to dry it.
Once it is dry check and if not working then replace this I.C to solve memory card problem in Nokia C2-03.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2-03 Lcd Display Problem Solution Ways Jumpers

Nokia C2-03 Blank Lcd Display, Nokia C2-03 White Lcd Display, Nokia C2-03 Lcd Jack Damage Prints Missing.
Tools:-
To solve lcd display problem in Nokia C2-03 we have required a few tools and components.
Nokia screw Driver t5 and t4 for opening screw .
Lcd panel for Nokia C2-03
Electronics Cleaner for rust or water damage.
Hot air to dry the mother board.
Lcd Jack if we have to replace it.Nokia X2-02 Ringer Problem Solution Ways Jumpers
Nokia C2-03 Lcd Display Problem Solution Ways Jumpers

Diagnosting & Solution:
After disassemble of Nokia C2-03 remove lcd and check lcd jack and its near by area for rust or water damages.
If here is some carbon on parts or at lcd jack.
Apply electronics cleaner and dry it with hot air for a few mint.
Do not apply so much heat it can harm your skin and mother board parts also.
Check with Lcd and if it is still blank replace with new one.
It might be possible that lcd jack pins are missing or not getting connected with lcd so change it.
Check all these links as given in above diagram in different colors so that you can find them easily.
Warnings:
Do not apply to much heat it can damage the mother board.
Make sure mother board is dry proper when you apply electronics clean.
Check Lcd jack and when removing it make sure solder has been melt.
If solder has not proper melt and you try to remove lcd jack prints might be damage.
When you replace lcd make sure lcd strip is proper fixed.
It can be damage when you assemble the phone if not in proper place.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2-03 Mic Problem Solution Jumper Ways Microphon

Nokia C2-03 Mic not working, Microphone is not working in Nokia C2-03, Voice is missing and can not reach to destination Mobile Phone, Mic problem, Microphone Solution in Nokia C2-03,
Nokia X2-02 Speaker Ear Peace Problem Solution Jumper Ways
Nokia C2-03 Mic Problem Solution Jumper Ways Microphon
Tools:-
Nokia T5 and T4 for disassemble.
Universal Microphone.
Electronics Cleaner.
Hot Air.
Electronics Meter.
Solding iron.
Diagnostics & Solutions:-
Before Disassemble of Nokia C2-03 make sure that mic whole in Cassing ( housing ) is opened. And here is not any dust in it. Disassemble the mobile phone and remove mic microphone from mother board with solding iron.
Check points on mother board with miter and if any value is missing check all these parts that are given in red and blue color in above diagram.If any of them is missing apply jumpers as described in above repairing picture.
Replace new mic and apply jumpers to its negative and positive points. On the mother board Red color line shows ground print and Blue line indicates positive print of mic. So this will help you to solve mic problem in nokia C2-03
Warnings:-
Apply solder on mic and Remove mic when it too hot so that mic print remain OK.
Don’t apply much heat with hot air it can damage the mother board.
Assemble with focus because if mic is not in its proper place voice will not reach to destination mobile. Or you will not be able to record voice in it.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2-03 Charger Not Supported Problem Solution Ways

Plug in Charging pin into charging jack of Nokia C2-03 and if it shows an indication message Charger Not Supported it can be due to these few parts that are given bellow in diagram.So after disassemble of Nokia C2-03 clean these parts and area with electronics cleaner.Nokia X2-02 Full PCB Diagram Mother Board Layout.
Noki C2-03 Charger Not Supported Problem Solution Ways
Apply hot air and make it dry.Resold these parts indicated with red lines in above diagram to solve Charger Not Supported in Nokia C2-03
You can take these parts from other models of nokia also to solve charging problem in nokia C2-03
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

nokia C2-03 Ringer Problem Solution Jumper Ways

Nokia C2-03 ringer HF is not working, Nokia C2-03 Ringer Speaker is not working, Nokia C2-03 can not play music. We can not here voice during loud speaker in nokia c2-03.
Tools:-
Nokia key T4 and T5
Hot air.
Solding Iron.
Electronics Cleaner.
Nokia C2-03 Ringer,Nokia X2-02 Keypad is Not Working or Hang Problem Solution
Nokia C2-03 Ringer Problem Solution Jumper Ways
Diagnostic & Solutions:-
If Nokia C2-03 is not abble to ring a bell and we can not use loud speaker it might be fault of ringer or it may not be attached with mother board.
it can be damage or might be its not in proper location.It can be cause of Water damages and missing components,So lets solve the problem in a few simple steps as given in above diagram.
Disassemble Nokia C2-03 and check ringer points with electronics meter.If ringer shows good value then check point on the mother board and if the have also a good value it can be cause of miss fitting.
So assembly with proper placements and tight the screw and try it if not working then replace ringer with new one.If you find some prints missing then apply jumpers as given in above diagram. There are two different color lines Red and Blue.These lines indicates the negative and positive prints of ringer in Nokia C2-03 so apply these jumper to solve ringer problem in nokia C2-03
Warnings:-
Do not apply much heat with hot air it can damage the mother board and your skin.
Keep in mind about placement of ringer because it is not proper ringer will not work.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia C2-03 Insert sim ways problem solution jumpers

Nokia C2-03 insert sim problem, Sim is not working in Nokia C2-03, Sim is not Valid, Single Sim is not working in Nokia C2-03
Tools:-
Nokia T4 and T5 key, Electronic meter, Electronics Cleaner, Hot Air, Solding Iron, Jumper Wire.
Nokia x3 keypad light ok Lcd light not working Problem Solution Tested
Nokia C2-03 Insert sim ways problem solution jumpers
Diagnostic and Solutions.
if sim is not working in Nokia C2-03 is can be cause of water damage or missing components. Use different sim and if sim is not working then de assemble Nokia C2-03.
Once Mobile phone is disassemble check all these parts that are given in above diagram and apply electronics cleaner. Apply hot air so that it can be dry but not to much because it can damage the mother board or may can harm your skin.
these different color lines are indicating different path and tracks that are used in sim function in Nokia C2-03 so if nay of them is missing apply that jumper as shown in diagram to solve insert sim problem in Nokia C2-03
If single sim is not working out of these two you can only jumper those parts that are used by it. And to find prints and track you can see above diagram.
Warnings:
Do not apply to much heat it can damage the mother board and harm your skin.
When apply jumpers make sure the do not be ground with other prints.It can short the mobile phone.
Remove Sim Ic with hot air because with Solding iron it might can damage prints also.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

Nokia 5250 Bluetooth Problem Solution Ways Jumpers.

this is diagram to show that which parts are used in blue tooth function in nokia 5250 .so check these parts that are encircled with red line,Nokia X2-02 lcd display ways jumpers problem solution white or blank.
and wash these with any electronics cleaner and apply a little heat with hot air or leave it to dry under electrical bulb for a few mints.it will become ok and blue tooth will become in working condition.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
Related Posts Plugin for WordPress, Blogger...

Mahbub Alfa Solution Headline Animator

Please Log in